1-2 Accumulator Assemble

1-2 Accumulator Assemble




1. Inspect the 1-2 accumulator piston (56) for the following conditions:

* Porosity
* Cracks
* Scoring
* Nicks and Scratches

2. Install a 1-2 accumulator piston oil seal ring (55) on the 1-2 accumulator piston (56).




3. Inspect the 1-2 accumulator housing for the following conditions:

* Porosity
* Cracks
* Scoring
* Nicks and Scratches
* Debris or blocked passages





Important: Some models may not use an outer 1-2 accumulator spring (54).

4. Install the 1-2 inner (104) and outer (54) accumulator springs.
5. Install the 1-2 accumulator piston (56).