Lifter / Lash Adjuster: Service and Repair

Valve Lifter Replacement

Tools Required

J 3049-A Valve Lifter Remover


Removal Procedure





1. Remove the cylinder head and gasket. Refer to Cylinder Head Replacement - Left Side (Cylinder Head Replacement - Left Side) or to Cylinder Head Replacement - Right Side (Cylinder Head Replacement - Right Side) .




2. Remove the valve lifter. Refer to Valve Lifter Removal (Overhaul) .
3. Clean and inspect the valve lifters. Refer to Valve Lifter and Guide Cleaning and Inspection (Overhaul) .



Installation Procedure





1. Install the valve lifter. Refer to Valve Lifter Installation (Overhaul) .




2. Install the cylinder head and gasket. Refer to Cylinder Head Replacement - Left Side (Cylinder Head Replacement - Left Side) or to Cylinder Head Replacement - Right Side (Cylinder Head Replacement - Right Side) .