Trim Plate Replacement - Instrument Panel (I/P) Accessory Right

Trim Plate Replacement - Instrument Panel (I/P) Accessory Right

Removal Procedure

1. Remove the screws that hold the trim panel to the I/P.
2. Remove the trim from the tabs in the I/P.



Installation Procedure

1. Align the trim pad with the I/P substraight tabs.

Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

2. Fasten the trim panel to the I/P.

Tighten the screws to 2 Nm (18 lb in).