Glove Box Removal/Installation

Glove Box Removal/Installation

SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Service and Repair before doing repairs or service.

NOTE: Take care not to scratch the dashboard or its related parts.

1. Remove the passenger's dashboard undercover Passenger's Dashboard Undercover Removal/Installation.

2. Remove the bolts.






3. While holding the glove box (A), release the glove box stops (B) on each sides from the dashboard by pushing them inward, then lower the glove box.





4. Install the glove box in the reverse order of removal.