LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> S2000 L4-2.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Service and Repair >> Overhaul >> Engine Oil Pan Removal

Engine Oil Pan Removal




Engine Oil Pan Removal

1. If the engine is already out of the vehicle, go to step 3.

2. Drain the engine oil. Service and Repair

3. Remove the bolt securing the oil pan, then remove the oil pan.
NOTE: Cut the oil pan seal by using the oil seal cutter when oil pan does not come off easily.