Front Bumper Removal/Installation (Except CR model)

Front Bumper Removal/Installation

'04-09 Models (Except CR Model)

NOTE:

- Have an assistant help you when removing and installing the front bumper.

- Take care not to scratch the front bumper or the body.

- Put on gloves to protect your hands.

1. Remove the front bumper as shown.

2. Install the bumper in the reverse order of removal, and note these items:
- Make sure the front bumper engages the hooks of the corner upper beams and the front fenders securely.

- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.