Glove Compartment: Service and Repair

Glove Box Removal/Installation

NOTE: Take care not to scratch the dashboard or the related parts.

1. While holding the glove box (A), remove the glove box stop (B) on each side.






2. Remove the glove box (A).

1. With navigation: Disconnect the USB adapter connector (B), and detach the harness clip (C).

2. While holding the glove box, remove the bolts.





3. Install the glove box in the reverse order of removal, and note these items:

- Make sure the connector is plugged in properly.
- Push the clip into place securely.