Idler Pulley: Service and Repair

Drive Belt Idler Pulley Replacement

Removal Procedure

1. Remove the drive belt. Refer to Drive Belt Replacement Service and Repair.





2. Remove the drive belt idler pulley bolt.

3. Remove the drive belt idler pulley.

Installation Procedure





1. Install the drive belt idler pulley.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the drive belt idler pulley bolt and tighten to

58 Nm (43 lb ft).

3. Install the drive belt. Refer to Drive Belt Replacement Service and Repair.