Rear Door Window Motor: Service and Repair

Rear Side Door Window Regulator Motor Replacement

Removal Procedure




1. Remove the rear door window regulator. Refer to Rear Side Door Window Regulator Replacement Service and Repair.
2. Remove the bolts retaining the rear window regulator motor to the regulator bracket.
3. Remove the rear window regulator motor from the regulator.

Installation Procedure




1. Install the rear window regulator motor to the regulator.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the bolts retaining the rear window regulator motor to the regulator bracket. Tighten the rear window regulator motor bolts to 4.5 Nm (40 lb in).
3. Install the rear door window regulator. Refer to Rear Side Door Window Regulator Replacement Service and Repair.