Endgate Lower Hinge Replacement - Endgate Side

Endgate Lower Hinge Replacement - Endgate Side

Removal Procedure




1. Remove the endgate from the vehicle. Refer to Endgate Replacement Service and Repair.
2. Remove the bolts retaining the endgate hinge to the endgate.
3. Remove the endgate hinge from the endgate.

Installation Procedure




1. Install the endgate hinge to the endgate.

Caution: Refer to Fastener Caution .

2. Install the bolts retaining the endgate hinge to the endgate and tighten to 20 Nm (15 lb ft).
3. Install the endgate to the vehicle. Refer to Endgate Replacement Service and Repair.