Front Bumper Fascia Replacement

Front Bumper Fascia Replacement (Canyon/Colorado)

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the front bumper (1) assembly. Refer to Front Bumper Replacement (Service and Repair).
3. Remove the push-pins retaining the fascia (2) to the front bumper.
4. Pull the fascia straight forward to remove.

Installation Procedure




1. Install the fascia (2) to the front bumper.
2. Install the push-pins retaining the fascia to the front bumper.
3. Install the front bumper (1) assembly. Refer to Front Bumper Replacement (Service and Repair).
4. Lower the vehicle.