Instrument Panel Cluster Trim Plate Bezel Replacement

Instrument Panel Cluster Trim Plate Bezel Replacement

Removal Procedure

1. If equipped, tilt the steering wheel to the full down position.
2. If equipped with a steering column mounted shift lever, block the wheels and position the shift lever in FIRST gear.




3. Carefully release the clips retaining the bezel to the instrument panel (I/P).
4. Remove the bezel from the I/P.

Installation Procedure




1. Position the bezel to the I/P.
2. Install the bezel, ensuring the retaining clips are fully seated.
3. If equipped with tilt steering, return the steering wheel to a neutral position.