Sun Visor: Service and Repair

Sunshade Replacement

Removal Procedure




1. Remove the 2 screws and washers (4) securing the sunshade (1) to the roof.
2. Remove the sunshade assembly.
3. Remove the screw and washer (3) securing the sunshade retainer (2) to the roof.
4. Remove the sunshade retainer.

Installation Procedure

1. Install the sunshade retainer.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the screw and washer (3) securing the sunshade retainer (2) to the roof. Tighten the sunshade retainer screw to 1.2 Nm (10 lb in).
3. Install the sunshade assembly to the roof with 2 screws and washers. Tighten the sunshade screws to 1.2 Nm (10 lb in).