Front Floor Console Armrest Replacement

Front Floor Console Armrest Replacement

Removal Procedure

1. Open the console armrest, revealing the lower compartment.




2. Remove the 3 screws (1) located on the upper hinge.




3. Remove the armrest from the vehicle.

Installation Procedure




1. Position the armrest to the console.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the 3 screws (1) retaining the armrest to the upper hinge. Tighten the screws to 1.5 Nm (15 lb in).
3. Close the armrest.