Radio Rear Side Door Speaker Replacement

Radio Rear Side Door Speaker Replacement

Removal Procedure

1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Rear Side Door Trim Panel Replacement).




2. Remove the screw securing the speaker to the door.
3. Remove the speaker and the two tabs from the slots in the door.




4. Disconnect the speaker electrical connector.

Installation Procedure




1. Connect the speaker electrical connection.




2. Install the two tabs on the speaker into the slots in the door.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the screw securing the speaker to the door.

Tighten the rear door speaker screw to 2.5 Nm (22 lb in).

4. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Rear Side Door Trim Panel Replacement).