LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2008 >> Canyon 4WD L4-2.9L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair

Drive Belt Tensioner: Service and Repair



Drive Belt Tensioner Replacement

Removal Procedure




1. Remove the drive belt. Refer to Drive Belt Replacement (Service and Repair).
2. Inspect the drive belt. Change the drive belt as necessary.
3. Using a wrench loosen and remove the drive belt tensioner bolt.
4. Remove the drive belt tensioner.

Installation Procedure




1. Install the drive belt tensioner.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the drive belt tensioner bolt.

Tighten the bolt to 50 N.m (37 lb ft).

3. Install the drive belt Drive Belt Replacement (Service and Repair).

scientia non olet · About LEMON Manuals