Anti-Theft - Passive Anti-Theft System (PATS) - Passive Start Antenna - Rear Seat

Passive Start Antenna - Rear Seat









Removal and Installation

1. Remove the rear seat cushion. For additional information, refer to Seating Rear Seat Cushion.

2. Pull the carpet forward to uncover the rear seat passive start antenna.

3. Disconnect the rear seat passive start antenna electrical connector.

4. Using a suitable tool (such as a trim removal tool), pry the 2 pushpins upward to release them from the floorpan and remove the rear seat passive start antenna.

5. To install, reverse the removal procedure.