Voice Activation Microphone: Service and Repair

Microphone









Removal

NOTE: If the microphone is removed from the headliner, a new microphone must be installed.

1. Using a suitable tool, (such as a thin small flat head screwdriver) twist and pry the microphone bezel from the headliner metal mounting bracket.

2. Remove the microphone from the headliner by grasping the microphone pigtail.
- Disconnect the microphone electrical connector.

Installation

1. Reconnect the microphone electrical connector.

2. Wrap the connection with anti-rattle tape.

3. Feed the microphone pigtail into the headliner through the microphone hole.
- Verify the microphone pigtail points towards the front of the vehicle.

4. Snap the microphone into the headliner mounting bracket.
- Verify the mounting bracket and microphone are snug to the headliner.