D-Pillar Trim Panel

D-Pillar Trim Panel

1. Remove the D-pillar trim panel screw cover.

2. Remove the D-pillar trim panel screw.

3. Remove the D-pillar trim panel.
- Pull the D-pillar trim panel outward to release the D-pillar trim panel retaining clips.

4. NOTICE: To avoid damage to the D-pillar trim panel, remove any retaining clips from the body and attach the clips to the D-pillar trim panel before installing.

To install, reverse the removal procedure.

- To install, make sure to align the trim panel retaining clips to the retaining clip holes in the body.