Hood Latch

Hood Latch









Removal and Installation

1. NOTE: Mark the location of the hood latch with a permanent-type marker.
Remove the 2 hood latch bolts and position the hood latch aside.

- To install, tighten to 35 Nm (26 lb-ft).


2. Disconnect the primary hood latch release cable.

3. Disconnect the secondary hood latch release cable.

4. Remove the hood latch.

5. To install, reverse the removal procedure.
- When the hood latch is installed, the latch adjustment must be checked to make sure the latch is installed and aligned correctly.