Low One Way Clutch

Low One Way Clutch

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Component Test

1. For low OWC (One-Way Clutch) system operation REFER to Low One Way Clutch .










2. NOTICE: Do not clean in water or with water-based solvents. Damage to the component may occur.

NOTE: The low OWC (One-Way Clutch) cannot be disassembled.
Clean and inspect the low OWC (One-Way Clutch) for cracks and damaged splines. The internal splined section should rotate counterclockwise and lock when rotated clockwise. If any damage is found or the clutch does not rotate or lock, INSTALL a new low OWC (One-Way Clutch).