Wiper Motor - Windshield

Wiper Motor - Windshield

Removal and Installation

1. Remove wiper mounting arm and pivot shaft. For additional information, refer to Wiper Mounting Arm and Pivot Shaft - Front Wiper Mounting Arm and Pivot Shaft - Front.

2. Remove the wiper motor arm nut.
- To install, tighten to 18 Nm (159 lb-in).

3. Disconnect the arm from the wiper motor.

4. Remove the 3 bolts and the wiper motor.
- To install, tighten to 7 Nm (62 lb-in).

5. To install, reverse the removal procedure.