Removal and Replacement

Engine Mount





Coolant Degas Bottle









Engine Mount









Removal and Installation

1. Remove the degas bottle bolt.
- To install, tighten to 8 Nm (71 lb-in).

2. Lift the coolant degas bottle off of the shock tower bracket and position it aside.

3. Install the Engine Support Bar.





4. Remove the 2 engine mount nuts.
- To install, tighten to 90 Nm (66 lb-ft).

5. Remove the 3 bolts and the engine mount.
- To install, tighten to 48 Nm (35 lb-ft).

6. To install, reverse the removal procedure.