C-Pillar Trim Panel

C-Pillar Trim Panel

Removal and Installation

1. Remove the upper C-pillar trim panel bolt cover.





2. Remove the upper C-pillar trim panel bolt.





3. Remove the safety belt anchor bolt.
- To install, tighten to 40 Nm (30 lb-ft).





4. Pull outward to release the C-pillar trim panel clips.

5. Reposition the safety belt through the C-pillar trim panel.

6. Remove the upper C-pillar trim panel.

7. NOTICE: To avoid damage to the C-pillar trim panel, remove any retaining clips from the body and attach them to the C-pillar trim panel before installing.

To install, reverse removal procedure.