Low One Way Clutch

Low One Way Clutch

Component Test

1. For low OWC (One-Way Clutch) system operation REFER to Low One Way Clutch Mechanical System - 6F50 and 6F55.












2. NOTICE: Do not clean in water or with water-based solvents. Damage to the component may occur.

NOTE: The low OWC (One-Way Clutch) cannot be disassembled.

Clean and inspect the low OWC (One-Way Clutch) for cracks and damaged splines. The internal splined section should rotate counterclockwise and lock when rotated clockwise. If any damage is found or the clutch does not rotate or lock, INSTALL a new low OWC (One-Way Clutch).