Headlamp: Service and Repair

Headlamp Assembly

WARNING: Before beginning any service procedure, REFER to Safety Warnings. Failure to follow this instruction may result in serious personal injury [1][2]Safety Warnings.

Exploded View










Removal

1. Remove the front bumper cover. REFER to Bumper Cover - Front Service and Repair.

2. Remove the 3 headlamp assembly retainers.

3. Remove the headlamp assembly and disconnect the electrical connectors.

Installation

1. Install the headlamp assembly.

1. Connect the electrical connectors and install the headlamp assembly.

2. Install the 2 headlamp assembly bolts.

- Tighten to 3 Nm (27 lb-in).

3. Install the front fender-to-headlamp assembly bolt.

- Tighten to 7 Nm (62 lb-in).

2. Install the front bumper cover. REFER to Bumper Cover - Front Service and Repair.