Instrument Panel Finish Panel - Center, Middle

Instrument Panel Finish Panel - Center, Middle

Removal and Installation

1. Remove the upper instrument panel center finish panel. For additional information, refer to Instrument Panel Finish Panel - Center, Upper Instrument Panel Finish Panel - Center, Upper.

2. Remove the lower instrument panel center finish panel. For additional information, refer to Instrument Panel Finish Panel - Center, Lower Instrument Panel Finish Panel - Center, Lower.

3. Remove the 4 middle instrument panel center finish panel screws.

4. Remove the middle instrument panel center finish panel in the following sequence.

1. Pull outward to release the retaining clips.

2. Disconnect the electrical connectors.

5. To install, reverse the removal procedure.
- Make sure to align the trim panel retaining clips to the retaining clip holes in the instrument panel.