Liftgate Window Latch

Liftgate Window Latch









Removal and Installation

NOTE: Make sure the liftgate window glass is in the raised position.

1. Remove the liftgate trim panel. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

2. Disconnect the liftgate window latch ajar switch electrical connector.

3. NOTE: Mark the position of the liftgate window latch prior to removing the liftgate window latch bolts.

Remove the 2 bolts and the liftgate window latch.

- To install, tighten to 12 Nm (106 lb-in).





4. NOTE: The liftgate window latch must be checked to make sure the latch is installed and aligned correctly.

To install, reverse the removal procedure.