Wiper Blade and Pivot Arm Adjustment - Windshield

Wiper Blade and Pivot Arm Adjustment - Windshield

1. Cycle and park the windshield wipers.

2. Verify the RH and LH windshield wiper blades are located at the alignment marks on the glass.





3. NOTE: Make sure there is no mechanical binding in the linkage preventing the wiper arms from returning to the fully parked position.
If necessary, remove the windshield wiper pivot arm nuts and the windshield wiper pivot arms and reposition them to the correct locations.

- To install, tighten to 25 Nm (18 lb-ft).