LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Edge AWD V6-3.5L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Rotor/Disc >> Service and Repair >> Removal and Replacement >> Rear Disc Brake >> Brake Disc Shield

Brake Disc Shield




Brake Disc Shield









Removal and Installation

1. Remove the wheel hub.

2. Remove the parking brake shoe return spring bracket bolt and bracket.
- To install, tighten to 5 Nm (44 lb-in).

3. Remove the brake disc shield.

4. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals