LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2012 >> 500 L4-1.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Cover >> Service and Repair >> Engine Timing Cover(s) - Removal

Engine Timing Cover(s) - Removal





REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the engine cover (1).





3. Remove the bolts (2 and 3) and the upper timing belt cover (1).





4. Raise and support the vehicle Maintenance.
5. Remove the right front wheel and tire assembly Tires And Wheels - Removal.





6. Remove two bolts (4) and the right vertical brace (5).
7. Remove two screws (2) from the front wheelhouse splash shield.
8. Remove three screws (1) and the frame splash shield (3).





9. Remove the accessory drive belt (4) Serpentine Accessory Drive Belt - Removal.





10. Remove the vibration damper (1) Vibration Damper - Removal.





11. Remove the bolt (2) and the lower timing belt cover (1).





12. Remove the bolt (2) and the side timing belt cover (1).

scientia non olet · About LEMON Manuals