Air Cleaner Body - Installation

INSTALLATION





1. Position the air cleaner housing into the engine compartment.
2. Install the air cleaner housing retaining bolt (3) and tighten to 5 Nm (44 in. lbs.).
3. Connect the air duct to the throttle body and the air cleaner housing and tighten clamps to 3 Nm (30 in. lbs.).
4. Connect the make up air hose (MUA) (2).
5. Connect the intake air temperature (IAT) sensor (5) electrical connector.
6. Position the engine cover (1) and secure the retaining grommets onto the ball studs.