LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Charger AWD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Pump >> Service and Repair >> Removal and Replacement >> Engine Oil Pump - Installation

Engine Oil Pump - Installation






INSTALLATION





1. Position the oil pump on the crankshaft and install the oil pump retaining bolts finger tight.
2. Using the sequence shown, tighten the oil pump retaining bolts to 28 Nm (21 ft. lbs.).
3. Install the timing cover Engine Timing Cover(s) - Installation.
4. Install the oil pan Engine Oil Pan - Installation.

scientia non olet · About LEMON Manuals