LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2012 >> Caliber L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Canister Purge Solenoid >> Service and Repair >> Evap Purge Solenoid - Removal

Evap Purge Solenoid - Removal






REMOVAL





1. Disconnect and isolate negative battery cable at battery.
2. Disconnect electrical connector (4) from evaporator purge solenoid (1).
3. Remove purge hose (3) from evaporator purge solenoid (1).
4. Remove quick connect fuel tank hose (2) from evaporator purge solenoid (1).
5. Release tab to remove evaporator purge solenoid (1) from body bracket (5).

scientia non olet · About LEMON Manuals