Removal

REMOVAL





1. Remove the third row seat as necessary to access to the seat belt lower anchor (2) on the quarter inner panel (3). Seat - Removal
2. Remove the bolt (1) and separate the seat belt anchor (2).





3. Using a trim stick C-4755 or equivalent, separate the retaining clips and remove the upper rear header trim. Rear Header Panel - Description
4. Remove the screw (1).
5. Using a trim stick C-4755 or equivalent, separate the trim (2), retaining clips and anchor (3).
6. Remove the D-pillar trim (2) and pull the belt through the panel.