LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner - Removal

Accessory Drive Belt Tensioner - Removal






3.6L





1. Disconnect the negative battery cable.
2. Remove the air intake system Air Cleaner Body - Removal.
3. Remove main drive belt Serpentine Accessory Drive Belt - Removal.
4. Remove tensioner assembly from engine front cover.

WARNING: Because of high spring tension, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly (except for pulley on tensioner).


scientia non olet · About LEMON Manuals