LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 L4-2.4L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Radio/Stereo >> Service and Repair >> Removal and Replacement >> Radio - Installation

Radio - Installation






INSTALLATION





1. Connect the electrical connectors to the radio.
2. Connect the antenna connector(s) to the radio.
3. Install radio and mounting fasteners.
4. Install instrument panel center bezel trim. Instrument Panel Console Bezel - Installation.
5. Connect the battery negative cable.

NOTE: REQ RADIO, After installation of the radio, remove the radio from "Transportation Mode" by pulling the IOD fuse or using the scan tool and perform a battery reset.

scientia non olet · About LEMON Manuals