Hydraulic Lifter - Removal

REMOVAL - HYDRAULIC LIFTER(S)






NOTE: The LH cylinder head hydraulic lifters are shown, the RH cylinder head hydraulic lifters are similar.

1. Disconnect and isolate the negative battery cable.
2. Remove the camshaft(s) Camshaft - Removal

NOTE: If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.

3. Remove the rocker arm(s) Valve Rocker Arm - Removal

NOTE: If the hydraulic lifters are to be reused, identify their positions so that they can be reassembled into their original locations.

4. Remove the hydraulic lifter(s) (1).