LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 200 L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Pillar Trim >> A-Pillar Trim Panel - Installation

A-Pillar Trim Panel - Installation






INSTALLATION





1. Place A-pillar trim into position.





2. Slide tether downward through housing (1) until clip engages (2).
3. Firmly seat A-pillar trim into position.

scientia non olet · About LEMON Manuals