Tail Lamp - Removal

LAMP UNIT

SEBRING





1. Disconnect and isolate battery negative cable.
2. Open decklid and pull back trunk carpeting.
3. Remove three wing-nuts attaching tail lamp (2).
4. Pull tail lamp (2) rearward, unsnapping it from the clips.
5. Disconnect wire connectors (3) from back of tail lamp.
6. Remove tail lamp (2) from vehicle.

AVENGER





1. Disconnect and isolate battery negative cable.
2. Open decklid and pull back trunk carpeting.
3. Remove three wing-nuts (1) attaching tail lamp (4).
4. Pull tail lamp (4) rearward, unsnapping it from the clips.
5. Disconnect wire connectors (2) from back of tail lamp (4).
6. Remove tail lamp (4) from vehicle.