LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Convertible L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Service and Repair >> Removal and Replacement >> Ladder Frame - Removal

Ladder Frame - Removal







REMOVAL





1. Remove oil panEngine Oil Pan - Removal.
2. Remove balance shaft assemblyEngine Oil Pump - Removal.
3. Remove ladder frame retaining bolts.
4. Remove ladder frame using pry point cast in the rear of the block (1).




5. To assist in removing the ladder frame another (1) pry point cast in the right side of the block.
scientia non olet · About LEMON Manuals