Seat - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Slide seat forward.
3. Using a trim stick C-4755 or equivalent, remove the seat belt anchor trim (4).
4. Remove seat belt anchor bolt (3) attaching seat belt (2) to seat.




5. Disconnect all electrical connectors (1 and 4).




6. Slide seat rearward.
7. Remove both front seat adjuster bolts (2).

CAUTION: Caution should be taken not to handle seat by adjuster release bar when removing spring loaded seat from vehicle.

8. Remove front seat from vehicle.