LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Evaporative Emission Control Canister >> Service and Repair >> Vapor Canister - Removal

Vapor Canister - Removal







REMOVAL





1. Disconnect fuel tank vapor line (1) from vapor canister.
2. Remove vapor canister filter hose (2) from evaporative system integrity monitor (ESIM) switch.
3. Disconnect electrical connector (3).
4. Remove vapor canister bracket bolts (5).
5. Remove vapor canister mounting bolt (4) and remove vapor canister from bracket.




CAUTION: Prior to removing the ESIM switch thoroughly clean the entire area of the switch and vapor canister. Failure to clean the entire assembly may lead to contamination from dirt and debris entering the vapor canister and/or the ESIM switch.

6. Remove ESIM switch (1) from vapor canister (3) by depressing the lock tab and rotating the assembly 1/4 turn.
scientia non olet · About LEMON Manuals