LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Front Crankshaft Seal >> Service and Repair >> Installation

Installation







INSTALLATION





1. Install crankshaft seal using Special Tool 6342 (1).
2. Install the dowel pin into the crankshaft to 1.2 mm (0.047 in.) protrusion.
3. Install the crankshaft sprocket. Timing Belt & Sprockets - Installation
scientia non olet · About LEMON Manuals