LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Pump >> Service and Repair >> Removal and Replacement >> Engine Oil Pump - Assembly

Engine Oil Pump - Assembly







ASSEMBLY

1. Assemble oil pump using new parts as required.
2. Tighten cover screws to 12 Nm (105 in. lbs.).
3. Prime oil pump before installation by filling rotor cavity with engine oil.
4. If oil pressure is low and pump is within specifications, inspect for worn engine bearings or other reasons for oil pressure loss.



scientia non olet · About LEMON Manuals