Description

DESCRIPTION

Available radio receivers include:

- AM/FM/MP3/CD with CD/DVD changer control (RAH sales code)
- AM/FM/MP3/cassette/CD/equalizer with CD/DVD changer control feature (RBP sales code)

The clock on the radio may be enabled by using the scan tool. Follow the steps of the following procedure to enable or disable the radio clock.

1. Access IPM ECU diagnostics.
2. Select Misc. Functions.
3. Highlight Configure Radio Clock, Select Start.
4. Select Next.
5. Choose Enabled or Disabled.
6. Select Finish.
7. Cycle Ignition OFF and time out ACC Delay (open door).