Removal

REMOVAL





1. Disconnect the negative battery cable.
2. Drain the fuel tank. Service and Repair.
3. Remove the cargo area interior trim panels.
4. Remove the fuel tank partition retaining bolts and remove the fuel tank partition.
5. Disconnect the fuel level sending unit/sensor harness connector (1).

NOTE: Place a shop towel around the fuel level sending unit/sensor to catch any excess fuel during disassembly.

6. Install Special Tool 9240 (5) and rotate the fuel level sending unit/sensor (2) counterclockwise.
7. Remove the fuel level sending unit/sensor (2) from the fuel tank (4).