Intake Manifold - Removal

REMOVAL

1. Disconnect the negative battery cable.
2. Remove the air cleaner housing. Air Cleaner Housing - Removal.
3. Remove the mass air flow sensor. Removal.
4. Remove the fuel rail with fuel injectors. Fuel Injector - Removal.
5. Disconnect the vacuum lines to the EGR valve, brake booster, crankcase ventilator and purge valve from the intake manifold.
6. Disconnect the engine harness connectors.




7. Disconnect the EGR pipe (1) at the EGR valve (2).




8. Remove the air pump switchover valves (4).
9. Remove the bolts, the intake manifold (1) and the gaskets (2).