Mounting Plate

MOUNTING PLATE





1. Remove the spoiler wing (2) from the linkage. Spoiler Wing.




2. Open the rear liftgate.
3. Remove the lower trim panel (1). Service and Repair.




4. Disconnect the spoiler electrical connectors (1).




5. Remove the two drain tubes from the mounting plate.
6. Remove the mounting plate nuts (1) from the rear liftgate.
7. Remove the mounting plate nuts (2) from the rear liftgate.
8. Lower the liftgate down and pull the mounting plate out of the rear liftgate.




9. Remove the mounting bracket from the mounting plate by removing the retaining nuts (1).