Engine Coolant Thermostat - Removal

2.0L/2.4L ENGINE










1. Remove upper intake manifold Intake Manifold - Removal.
2. Partially drain cooling system below the thermostat level.
3. Disconnect upper radiator hose from outlet connector (2).
4. Disconnect coolant recovery system hose from outlet connector.
5. Turbocharger equipped vehicles:
- Remove fastener securing A/C suction line support bracket to coolant outlet connector stud.
- Unclip A/C suction line support bracket from A/C suction line. Reposition bracket.

6. Remove coolant outlet connector bolts.
7. Remove thermostat assembly, and clean sealing surfaces.